TOTAALLEVERANCIER VOOR IRRIGATIE & BEREGING EN POMPEN VAN DOSATRON
TOTAALLEVERANCIER VOOR IRRIGATIE & BEREGING EN POMPEN VAN DOSATRON
Dosatron’s D30 Greenline series metering pumps are ideally suited to large agricultural and horticultural irrigation systems. With a maximum of 30 m3/h, this is one of the largest dosing pumps in Dosatron’s range.
Within the highly complex context of numerous regulatory requirements, the primary objective is quality and reliability of production. Economical and thoughtful management of additives allows these criteria to be met while still complying with environmental regulations. Additive management is one of the key success factors.
In horticulture, you usually have raw, unfiltered water that adversely affects the operation of your plant. It is advisable to place a filter (maximum 300μ) in front of the dosing pump to ensure optimum life and accurate dosing. Check the viscosity listed on the safety data sheet (SDS) of your products. Multiple pumps may be needed to inject different additives. Check that your products are compatible with each other. Maintain a space of at least 10 cm between the bottom of the strainer and the bottom of the reservoir to avoid clogging the intake valve. Adjust the length of the intake line to your installation.
Dosing pumps installed in the conditioning plant of a plant nursery or in the water supply system at the sales site ensure preservation of cut flowers and also control bacteria and unpleasant odours. Multiple pumps may be needed to inject different additives. Check that your products are compatible with each other. Maintain a space of at least 10 cm between the bottom of the strainer and the bottom of the reservoir to avoid clogging the suction valve. Adjust the length of the intake line to your installation. Non-filtered water affects the operation of the installation. It is advisable to install a filter (300μ) in front of the dosing pump to ensure optimum service life and accurate dosing.
Currently, agriculture is facing ever-increasing production needs while the cultivatable area is decreasing. By improving hygiene, high yields and production quality can be achieved while complying with environmental regulations. With thoughtful management of mineral and phytopharmaceutical additives through dosing pumps from Dosatron’s D30 Greenline series, the influence of climatic factors can be reduced and harvest optimised. New technologies and applications make it possible to meet the growing global need. Indeed, good hygiene is a prerequisite for achieving maturation of the full crop. Thoughtful production to achieve the best possible results and manage farmland effectively.
5ºC is the minimum temperature at which a Dosatron remains effective.
40ºC is the maximum temperature at which a Dosatron remains effective.
Each Dosatron is self-priming. Manual venting is possible.
The maximum suction height is 4 metres.
5ºC is the minimum temperature at which a Dosatron remains effective.
40ºC is the maximum temperature at which a Dosatron remains effective.
Each Dosatron is self-priming. Manual venting is possible.
The maximum suction height is 4 metres.
Wij geloven in samenwerking en win-win. Geïnspireerd door de lessen van Stephen Covey, werken we proactief en zoeken we altijd naar de beste oplossingen. Samen bereiken we meer.
Wij geloven in samenwerking en win-win. Geïnspireerd door de lessen van Stephen Covey, werken we proactief en zoeken we altijd naar de beste oplossingen. Samen bereiken we meer.
Veha Plastics B.V. is onderdeel van:
Talentgroep Twente B.V.
