Dosatron Water Line
Are you looking for a water treatment or chlorination solution? An estimated 2.6 billion people have insufficient access to drinking water. Producing drinking water in remote locations or emergency situations requires reliable equipment. Equipment suitable for sometimes extreme conditions (no electricity, local restrictions etc). To proportionally dose in drinking water installations, there is the Dosatron Water Line. This series from Dosatron is NSF/ANSI 61 and 272 certified. This means that these pumps may be used in the food and food industry. These certifications are recognised by Dosatron. Water treatment without electricity. Chlorination upstream of the consumption point or re-chlorination (remote locations or emergencies). Water disinfection (bactericide, virucide, fungicide) with residual protection against potentially low levels of contamination after treatment. Easy to measure chlorine concentration. Easy-to-implement solution. Cheap and locally available stock. Proven technique. The choice of model is determined by the main flow rate and the daily volume of water to be treated. Recommendations Water Line Chlorine degrades much faster when exposed to light. The solution tank should be made of dark plastic and have a non-airtight lid. It should be placed in a control room, in the dark, with good ventilation. Also, the pump should be protected from vandalism. Comply with locally applicable regulations regarding water treatment. Observe the minimum contact times required for effective control of bacteria and viruses. For hard water, the concentration of active chlorine in the stampolossing injected by the Dosatron D20WL2 should not exceed 1g/l. For hard water, the concentration of active chlorine in the stem solution injected by the Dosatron WL3000IE should not exceed 10g/l.
Showing all 9 results